New & Incoming Items from Autoexe this month!

We're getting a large stocking order from Autoexe this month - see what we're getting before it arrives. All listed products will ship from our facility (No dropship). 



The AutoExe Adjustable Tie Rods allow lowered vehicles to adjust the angle of the tie rods, putting them back into their intended position, rather than at an angle. This reduces bump steer and other unwanted problems associated with off-angle tie rods. 


Specs:

  • Installation takes 1 hour.  
  • Constructed from forged carbon steel
  • Fits KE Models only. See separate listing for KF model. 
Click here to check out the AutoExe Sports Tie Rods - Mazda CX-5 (KE)

Autoexe Front Strut Tower Bar (KE & KF)


To achieve better handling for the Mazda CX-5, AutoExe has manufactured a one-piece steel strut tower bar that has welded on brackets. Binding the right and left strut towers together will prevent chassis flexing and increase handling when going into corners. We have installed the KE compatible bar into one of our shop vehicles. 


Specs:

  • Installation takes 30 mins 
  • Available for KE and KF 
  • Steel 1-piece structure 2-point type
View the strut tower for KE here. View the strut Tower for KF here. 


AutoExe Sports Side Visor


The Autoexe Sports Side Visor for the is one of the highest quality visors available on the market. The high performance design offers excellent wind deflection at speed as well as allowing you to vent the windows during rain. We have multiple sets of visors coming in for multiple vehicles - see what's available below:


Specs:

  • 2 or 4-piece kit (depending on vehicle)
  • Smoked Finish
  • Deflects wind from the side of the car at high speeds
  • Allows you to vent the windows during rainy days
Our incoming shipment has visors for the following vehicles available. Click the vehicle to view the product listing:
Read More
(0) Comments

Pivot Racing is now available at Footwork Autosport!


Pivot Racing is now available at Footwork Autosport! Founded in 1986, Pivot Co, LTD became an supplier for race cars, providing engine control devices and instruments to race teams before forming the consumer division of Pivot in 1992. Some technical innovations created by Pivot Racing include a water cooling spray for the intercooler and the world's lightest tachometer. 

3 DRIVE CONTROL UNIT

The 3-Drive Control unit is designed to allow for full adjustability of throttle response going to the engine. As Pivot has been making throttle control and engine management devices for decades, they have thought of everything when designing their throttle controller. There are two separate variants of the 3-Drive, with each unit shares the same great features:
  • 17 step/ 4 mode adjustment for fully customizable throttle response
  • Does not need to be connected to OBD in order to work
  • Simplified wiring allows for easy install
  • Built in fail-safe which will return to "Normal" mode upon poor connection or trouble
The 3-DRIVE EVO is the standard unit; the 3-DRIVE Pro is the low-profile version which allows for easier mounting as the display and controller are two separate units; The 3-DRIVE EVO combines both the unit and controller into one unit. View the 3-DRIVE EVO by clicking here and view the 3-DRIVE PRO by clicking here.


3 DRIVE BLP



The 3-Drive BLP is a throttle controller with an adjustable throttle blipping feature to provide active rev matching for manual transmissions. Both the throttle control and auto-blip can be adjusted (10 way adjustment for throttle). Much like the 3-Drive Pro, the controller and unit are two separate units for ease of mounting. 

*Every 3-DRIVE unit that exists will require the appropriate harnesses that are specific for your vehicle. The harnesses are sold separately and can be viewed here. 

Direct Drive Throttle Direct Controller (For 86/BR-Z/FR-S)


Pivot's Direct Drive for the 86/BR-Z/FR-S is specially designed for the FR-S/86 platform, with 10 specially tailored engine modes tailored for the engine. Unlike the 3-Drive units, this is mounted directly inside the engine bay and can be done so in minutes. The case is fully sealed and the circuit board is protected by a dual layer waterproof coating to ensure failure free operation even when exposed to high pressure water and condensation. The Direct Drive must be adjusted from the engine bay as it is engine mounted. This cannot be used with the 3-DRIVE or any other throttle controller.  

View the Pivot Direct Drive for FR-S/86/BR-Z by clicking here




Read More
(0) Comments

Blitz Racing Returns Home!


In 1993, a small shop in Torrance, CA known as Zen Motorsports began importing in Blitz Racing products prior to the establishment of Blitz Racing USA. Today, the former owner of Zen Motorsports is now the founder/owner of Footwork Autosport, and the brand returns to the home of its original importer, with our first products hitting our warehouse shelves today. 
Read More
(0) Comments

New Products In Stock from SARD Racing!

We just got a new shipment of SARD products that are in stock and ready to ship from our warehouse in Torrance, California! Here's a quick overview of what we have in stock:



The SARD 5000G Mag II Drain Plug is a direct replacement drain plug with an extremely strong neodymium magnet attached to the end. This magnet's strong power can catch any metal particles or shavings that can fall in your engine. This drain plug is application specific; if you need help determining the correct application, please call or email us. Click here to view all Mag II Plugs

86 Dipstick (Limited Edition)


The SARD 86 Limited edition dipstick is a full replacement dipstick designed for the Toyota 86/FR-S and BR-Z. Simply remove your factory dipstick and replace it with the SARD one - there are no handles to remove or change. Click here to view the 86 Dipstick

Dead Pedal For Lexus RC


The SARD Footrest for the RC-F uses a brushed 304 stainless steel body with Super duralumin (A7075) for the supporting piece. A beautiful top knurled piece provides a strong grip surface for the top of your shoe. There are two holes where the knurled piece can be fitted to accommodate two different shoe sizes. Click here to view the SARD Footrest

Breather Tank w/cap

The SARD Breather Tank is a universal fit part which is designed to use a SARD radiator cap as a relief to prevent the tank from rupturing under pressure. As this is a universal fit part, you will need to do your own adjustments for things such as cutting tubing and mounting. Click here to view all breather tanks

High Pressure Radiator Cap


The SARD high-pressure radiator cap allows you to raise the boiling point of the coolant in your radiator by increasing the relief pressure on the cap. Two different relief settings are available; this cap is application specific- if you are unsure about your fitment, please contact us. Click here to view all SARD radiator caps

Lower Hose Adapter Kit


SARD's lower hose adapter is designed to remove any bubbles that may occur in the cooling system.  The lower hose adapter kit fits Mazda, Mitsubishi and Honda Toyota (application specific). If you are unsure about which part you need, please contact us. Click here to view all lower hose adapter kits

Die Cut Decals


SARD Die cut decals are an excellent way to show your brand affinity. These high quality stickers can be affixed to your windows easily and come in a variety of sizes and colors. Click here to view the product listing.




Read More
(0) Comments
More results: 1 2 Next Page