Class and comfort have joined hands once again with the introduction of the AutoExe Leather Shift Knob. Replace your factory shifter with one that is 51 mm in diameter, made using high quality materials, and hand stitched with genuine leather for a light weight and comfortable grip when shifting.

Specs:

• Overall weight is 190g.
• Manual transmission version is a simple screw-on type with a shift coin.
• Installation takes 10 minutes.

All sales are final. No exchange, return, or refund allowed.

For international clients, please email Sales@FootworkAutosport.com for shipping quotation.

Class and comfort have joined hands once again with the introduction of the AutoExe Leather Shift Knob. Replace your factory shifter with one that is 42 mm in diameter, made using high quality materials, and hand stitched with genuine leather for a light weight and comfortable grip when shifting.

Specs:

• Two designs for manual transmissions
• Overall weight is 190g
• Comes stitched in Red
• Installation takes 10 minutes

Note: The manual shifter Will Only work on manual transmission cars with a thread pitch of M10 x 1.25.

All sales are final. No exchange, return, or refund allowed.

For international clients, please email Sales@FootworkAutosport.com for shipping quotation.

Class and comfort have joined hands once again with the introduction of the AutoExe Leather Shift Knob. Replace your factory shifter with one that is 42 mm in diameter, made using high quality materials, and hand stitched with genuine leather for a light weight and comfortable grip when shifting.

Specs:

• Two designs for manual transmissions
• Overall weight is 190g
• Comes stitched in Black
• Installation takes 10 minutes

Note: The manual shifter will ONLY work on manual transmission cars with a thread pitch of M10 x 1.25.

All sales are final. No exchange, return, or refund allowed.

For international clients, please email Sales@FootworkAutosport.com for shipping quotation.

The LegSport Seat Belt Alarm Canceler is great for weekend track warriors who are using aftermarket safety harness but retaining your factory seat belt. Simply insert into your factory seat belt lock to eliminate the seat belt alarm.

WARNING! (PLEASE READ)

Factory seat belt shall be worn at all time by driver and passengers during vehicle operation The LegSport Seat Belt Alarm Canceler are NOT to be used in any other circumstances other than in a vehicle that is equipped with approved safety driver and or passenger racing harness and in need of a factory safety belt alarm canceler. Keep in mind when seat belt alarm canceler is installed, your vehicle's SRS (Safety Restraining System) is activated, unless user disable the SRS for off-road or competition use.

All sales are final. No exchange, return, or refund allowed.

For international clients, please email Sales@FootworkAutosport.com for shipping quotation.

Give your Mazda interior that aesthetic touch with this fashionable shift knob. This stylish shift knob was ergonomically designed and contoured with carbon fiber, to provide the driver with a comfortable grip.

• Fits manual transmission cars only
• Mazda MT thread pitch

All sales are final. No exchange, return, or refund allowed.

For international clients, please email Sales@FootworkAutosport.com for shipping quotation

AutoExe offers their Fuel Cap Cover for all modern Mazda vehicles. This ABS Resin constructed cap mounts onto the factory OEM factory Mazda fuel cap and gives an enhanced look your vehicle. Finished in the classic AutoExe Red, this fuel cap cover, combined with an oil filler cap and level gauge grip with the same design, greatly enhances the total look of any Mazda.

Specs:

• ABS Resin Construction
• "AutoExe" Logo
• Mounts using 3M double sided tape
• Includes Fuel Stickers for Fuel Cap and Fuel Door- Regular Gas (Red), Premium Gas (Yellow), and Diesel (Green)

Fits the Following Vehicles:

• MX-5 Roadster (all ND series)
• MAZDA 2 / Demio (all DJ series )
• MAZDA 3/ Axela (all BP/ BM / BY series)
• MAZDA 6 / Atenza (all GJ series)
• CX-3 (all DK series)
• CX-30 (All cars)
• MX-30 (DREJ3P)
• CX-5 (all KF / KE series cars)
• CX-8 (all KG series cars)

All sales are final. No exchange, return, or refund allowed.

For international clients, please email Sales@FootworkAutosport.com for shipping quotation.

AutoExe offers a replacement oil filler cap that replaces the factory OEM resin oil filler cap with a fully machined version made out of aluminum. The red alumite processing and laser-engraved AutoExe logo gives the engine bay a custom, refined look. Combined with the brake reservoir cap and level gauge grip with the same design, it enhances the total look of the engine bay.

Specs:

• Aluminum - Fully Machined
• Red Alumite Processing
• Laser Engraved "AutoExe" Logo

*Refer to compatibility chart below for model fitment*

All sales are final. No exchange, return, or refund allowed.

For international clients, please email Sales@FootworkAutosport.com for shipping quotation.

Autoexe offers a replacement oil filler cap that replaces the factory OEM resin oil filler cap with a fully machined version made out of aluminum. The red alumite processing and laser-engraved AutoExe logo gives the engine bay a custom, refined look. Combined with the brake reservoir cap and level gauge grip with the same design, it enhances the total look of the engine bay.

• Aluminum - Full Machined
• Red Alumite Processing
• Laser Engraved "AutoExe" Logo

*Refer to compatibility chart below for model fitment*

All sales are final. No exchange, return, or refund allowed.

For international clients, please email Sales@FootworkAutosport.com for shipping quotation.

This item that replaces the resin grip on the factory OEM oil level gauge with a full aluminum piece. The red alumite processing and laser-engraved AutoExe logo gives the engine bay a custom and gorgeous look. DIY installation is possible with the included dedicated tool. There are two (2) versions to cover a wide range of Mazda vehicles equipped with the Gas, diesel, and Skyactiv engines. This oil grip does not fit vehicles equipped with Skyactiv-X or Skyactiv-Turbo, they would need Type-B. The Type-B gauge grip has been discontinued from AutoExe and is no longer available.

Specs:

• Aluminum - Fully Machined
• Red Alumite Processing
• Laser Engraved "AutoExe" Logo
• Dedicated Tool for Mounting is Included
• DOES NOT FIT VEHICLES WITH THE SKYACTIV TURBO ENGINE. DOES NOT FIT MAZDA3 WITH SKYACTIV-X ENGINE.

*Refer to compatibility chart below for vehicle fitment*

All sales are final. No exchange, return, or refund allowed.

For international clients, please email Sales@FootworkAutosport.com for shipping quotation.

Pivot’s 3-Drive Pro allows adjusts to the engine output according to the amount of throttle used. This module features three modes: "power mode", "response mode", and "ECO mode". Power and Response modes increase the throttle response, while Eco mode reduces the response and facilitates fuel-efficient driving. Pivot’s simplified wiring prevents need for a power connection to the OBD port, making it possible to use other OBD connected products without a splitter. The compact, thin, square design with accentuated edge allows for installation in any number of places without that added-on look. It also includes an initialization style set-up that makes sure that malfunctions will never occur, no matter what type of pedal is being used. This product also features a safety system which automatically returns to “NORMAL” mode upon poor connection or trouble ensures your safety.

Specs:

• “POWER” mode with 7 steps for increasing response across all ranges
• “RESPONSE” mode with 5 steps for increasing response, similar to a cable throttle, in the lower and middle ranges
• “ECO” mode with 5 steps for suppressing rapid acceleration to help increase gas mileage
• “NORMAL” mode for regular driving
• Highly precise monitoring displays accelerator opening in units of 1 from 5% to 100%.
• Can be used in euro cars as well as those equipped with collision mitigation systems.

Pivot’s 3-Drive Pro allows adjusts to the engine output according to the amount of throttle used. This module features three modes: "power mode", "response mode", and "ECO mode". Power and Response modes increase the throttle response, while Eco mode reduces the response and facilitates fuel-efficient driving. Pivot’s simplified wiring prevents need for a power connection to the OBD port, making it possible to use other OBD connected products without a splitter. It also includes an initialization style set-up that makes sure that malfunctions will never occur, no matter what type of pedal is being used. This product also features a safety system which automatically returns to “NORMAL” mode upon poor connection or trouble ensures your safety.

Specs:

• “POWER” mode with 7 steps for increasing response across all ranges
• “RESPONSE” mode with 5 steps for increasing response, similar to a cable throttle, in the lower and middle ranges
• “ECO” mode with 5 steps for suppressing rapid acceleration to help increase gas mileage
• “NORMAL” mode for regular driving
• Highly precise monitoring displays accelerator opening in units of 1 from 5% to 100%.
• Can be used in euro cars as well as those equipped with collision mitigation systems.

Enjoy ease of use and the added benefit of engine dress-up with the AutoExe Hood Damper Kit. Each damper utilizes a gas-powered design to make opening and closing the hood smooth and easy. The AutoExe hood damper kit utilizes two high quality dampers to prop your hood open easily and securely.

Specs:

• Made from lightweight steel and aluminum.
• Bolts on easily to the vehicle without having to drill any holes.
• Installation takes 1 hour.
• Available for Mazda 3 BP model

All sales are final. No exchange, return, or refund allowed.

For international clients, please email Sales@FootworkAutosport.com for shipping quotation.

Please check your application and fitment before purchasing.

Enhance your engine bay with AutoExe’s precision-crafted Aluminum Brake Fluid Tank Cap, designed to replace the standard resin factory cap with a high-quality, fully machined aluminum upgrade. Featuring a bold red alumite finish and a laser-engraved AutoExe logo, this cap adds a refined, motorsport-inspired touch to your vehicle’s engine compartment.

With a 62mm diameter—approximately 10mm larger than the OEM cap—this upgrade provides a more substantial and premium feel. Designed for SKYACTIV engine-equipped vehicles (excluding some models) and the RX-8, the cap seamlessly integrates with AutoExe’s matching oil filler cap and level gauge grip, completing a coordinated, high-performance aesthetic under the hood.

Upgrade your engine bay with the AutoExe Aluminum Brake Fluid Tank Cap, where craftsmanship meets performance styling.

Specs:

• Billet Machined Aluminum Construction
• 62mm in Diameter (10mm larger than OEM cap)
• "AutoExe" Logo Laser Engraved
• Replaces OEM Factory Brake Fluid Cap (Seal from original cap is required)
• Fitment: Compatible with most SKYACTIV-equipped Mazda vehicles (excluding some) and the RX-8

Please Refer to the Chart below for fitment confirmation:

All sales are final. No exchange, return, or refund allowed.

For international clients, please email Sales@FootworkAutosport.com for shipping quotation.